Features of the rotary nozzle
1. The water consumption of the rotating sprinkler is 60% less than that of the traditional scattering sprinkler, so each irrigation area can have more rotating sprinklers, thereby reducing the complexity and cost of the entire system. 2. When the rotating nozzle is maintained in a high-efficiency spraying state, no atomization occurs within the pressure…
Read article
Characteristics of special spray disinfection equipment for animal husbandry
The special spraying and disinfection equipment for animal husbandry is mainly composed of four parts: pumping station unit, spraying unit, control unit and high-pressure shunt valve unit. 1. Pumping station unit: The pumping station unit uses a high-pressure ceramic plunger pump to generate high-pressure water of 7Mpa, and the pressure of the pumping station is…
Read article
Introduction of Impact Atomizing Nozzle
The impact atomizing nozzle is a high-speed spray of liquid from the nozzle, which collides with the solid at the nozzle outlet, or two fluids collide with each other, thereby breaking into fine droplets. Impact atomizing nozzles create extremely fine atomization, and in some applications, impact atomizing nozzles can even replace many expensive two-fluid air…
Read article
Principle and Application of Air Atomizing Nozzle
Air atomizing nozzles mainly send liquid to the nozzle by pressure, air and liquid can be mixed externally or internally to produce a fully atomized spray effect. The spray shapes of air atomizing nozzles include 360-degree annular, fan-shaped and deflection fan-shaped spray shapes. Air atomizing nozzles can provide a specific spray shape, specific flow and…
Read article
Drying process of centrifugal spray drying equipment
The drying process of centrifugal spray drying equipment can be divided into three stages:1. Use a fine spray of a spray dryer or drop any liquid feed in the atomization process, the spray contacts and suspends the hot gas through a stream that allows the evaporation of the liquid and the removal of dry solids;2.…
Read article
Features of Clip Adjustable Ball Nozzle
As a connection method of the nozzle, the clip nozzle has its own stainless steel clip, which is the core component of the spray system and one of the most commonly used treatment methods before painting. Therefore, the clip adjustable spherical nozzle is actually a An important part of the pre-installation treatment equipment, so are…
Read article
Mixed flow nozzle Venturi nozzle principle
Venturi nozzles have a very wide range of applications, and have high work efficiency and practicability, so their working principle has attracted much attention during use. The following is the principle of Venturi nozzles. Nowadays, mixed-flow nozzles and Venturi nozzles are used at a relatively high rate, and they are quite satisfactory in improving the…
Read article
Structure Design of Mixed Flow Nozzle
In industrial production, mixed flow nozzles are in the technical field of a new technology. And now the use of this kind of nozzle is also very common in China, which is a new development of the nozzle industry in the future. The structure design of the mixed-flow nozzle is to use one of the…
Read article
The Relationship Between Fuel Nozzle And Combustion Device
We all know that the use of nozzles is particularly extensive, and the application of nozzles in combustion devices is also particularly important. It is an indispensable component of various combustion devices. A part of the combustion device and the fuel nozzle have been integrated, and the nozzle has also become a part of the…
Read article
Application Principle Of Dust Removal Nozzle In Dust Control
Nozzle spray can not only be used for cooling, but also can be used for dust removal under certain circumstances, that is, dust removal nozzles. For some industries such as thermal power plants, cement plants, refractory materials processing plants and coal-fired boilers, which pollute the environment a lot, such industries will generate a lot of…
Read article
The principle of nozzle spray cooling
The spraying principle of spray cooling equipment: spray cooling is to mix a small amount of liquid in the pressure air flow to form a mist of gas and liquid through the spray to generate a high-pressure jet. be fully lubricated. This gas and liquid mixed fluid itself has a certain pressure and speed, its…
Read article
Construction and installation points of fire nozzles
Construction and installation of fire nozzles (1) The installation height of the closed nozzle is required to meet the conditions of “make the nozzle open in time by heating, and make the sprinkler of the open nozzle effectively cover the fire range”. Exceeding the above height, the nozzle will not be able to be heated…
Read article