Characteristics And Application Of Small Flow Fan-shaped Air Atomizing Nozzle
If the spraying workshop in our working environment is too dry, static electricity will be formed, which will affect the effect of spraying. If the spraying workshop is too dry, a large amount of dust will be generated, which will have a great impact on the smoothness of the sprayed surface. For humidification in the…
Read article
Characteristics And Application Of Stainless Steel Air Atomizing Nozzle
The internal structure of the stainless steel air atomizing nozzle is specially designed, so that the liquid and gas can be fully mixed together. Even without changing the air and liquid pressure, two different spray shapes are sprayed. The stainless steel atomizing nozzle can spray fine and uniform atomized particles, which can improve the environment…
Read article
Spray Shapes And Main Categories Of Full Cone Nozzles
The spray type coverage area formed by the Full cone nozzle is circular, square or oval, and the area is completely filled with spray droplets. This type of spray is usually created with internal vanes. The vanes allow controlled turbulence of the liquid before the nozzle orifice. Full cone coverage can also be obtained using…
Read article
Problems And Troubleshooting During Nozzle Use
Reasons for nozzle damage 1. Erosion. When the liquid with high flow rate passes through the metal surface of the nozzle hole, it will erode the nozzle hole, causing the nozzle pressure to decrease and the spray state to become irregular. The probability of nozzle erosion depends on the hardness of the liquid, the spray…
Read article
The Role Of Atomizing Nozzles In The Environmental Protection Industry
Whenever we walk through the garbage transfer station, we will smell an unpleasant rotten smell, which makes people uncomfortable, and the smell of some big cities is not very strong, because they are to improve the image of the city, through atomization The nozzle is treated by smell except special, the following is the application…
Read article
Advantages Of High Pressure Spray Atomization
The high-pressure spray system consists of water purification and filtration system, water temperature control, water level control, constant pressure water supply, multi-pipe water delivery, intelligent instrumentation and humidity control. The tap water becomes softened water through the filter and is sent to the water tank. The water tank is equipped with an upper and lower…
Read article
Classification Of Common Industrial Nozzles
Common industrial nozzles are divided into the following categories: 1. According to the material classification, it can be divided into: metal nozzle, plastic nozzle, ceramic nozzle, alloy nozzle;2. According to the spray shape, it can be divided into conical nozzles, square nozzles, rectangular nozzles, oval nozzles, fan nozzles, column flow (DC) nozzles, etc. Except for…
Read article
Features And Introduction Of High Pressure Washer Nozzles
There are many types of high-pressure cleaners, such as gasoline high-pressure cleaners, imported high-pressure cleaners, sewer high-pressure cleaners, and large-flow industrial high-pressure car washers. The part they all have in common is the pressure washer nozzle. So what are the characteristics of high pressure washer nozzles? What are the types? Features and comprehensive introduction of…
Read article
Introduction And Application Effect Of Plastic Fan Nozzle
The plastic fan-shaped nozzle is made of engineering plastic material, which is resistant to wear and corrosion, and the spray effect is also very good. It is widely used in various industrial production fields. So what is the application effect of plastic fan nozzles? Introduction of plastic fan nozzle 1. The commonly used plastic fan…
Read article
Structure of Silicon Carbide Desulfurization Nozzle
Silicon carbide desulfurization nozzle is a nozzle made of silicon carbide. It is often used in power plant desulfurization. It is a new type of nozzle with high temperature resistance, wear resistance and corrosion resistance. application. In order to adapt to different industries, silicon carbide nozzles with different structures are usually designed. Today, I will…
Read article
Maintenance Plan For Desulfurization Nozzle
In the desulfurization system, the nozzle is mainly in the spray layer of the desulfurization tower, that is, in the spray system, the nozzle becomes the final executor of the spray system, and the working state of the nozzle determines the effect of the spray, so in the production process We need to carry out…
Read article
How To Choose An Irrigation Sprinkler?
When irrigating, sprinklers are important equipment. The quality of the nozzle directly affects the quality of the project. For a good sprinkler, it requires not only good mechanical performance (simple layout, reliable operation), but also good hydraulic performance, that is, it can meet the main technical requirements of sprinkler irrigation (the combined sprinkler irrigation intensity…
Read article