How the Spiral Nozzle Works
A spiral nozzle is a solid cone or hollow spray nozzle. The jet angle can range from 60°-170° at 3 bar pressure, and the liquid flow rate can range from 5.5-4140 L/min. This compact design has an unobstructed and unblocked coreless straight-through flow channel design, which enables the liquid to reach the maximum flow rate…
Read article
Application of CYCO Nozzle in Bottle and Tank Industry
Nozzles play a vital role in tank spraying and cleaning. Due to the high speed of the line, uneven application and incomplete cleaning can quickly cause costly problems. Not only are CYCO nozzles designed to ensure quality, they also help reduce spray material costs, reduce maintenance time and extend the interval between nozzle changes. Tank…
Read article
The equipment composition of the spray dust removal system
Working principle: The spray dust suppression system is sprayed in a very fine atomized state, and when sprayed into the air, it can quickly absorb dust particles of various sizes in the air, and the particles will fall when they accumulate a certain weight or volume, thus playing the role of dust removal. At the…
Read article
Features and advantages of spray dust removal systems
1. The dust removal efficiency is high, and the control effect of inhalable dust below 10 μm is as high as 96%, avoiding the harm of silicosis; 2. The spray gun and nozzle sprinkle water evenly, the rain and fog effect is good, avoid the occurrence of blind spots, and can effectively prevent and fix…
Read article
Application of Nozzle in Spraying Pretreatment
Spray pretreatment applications involve cleaning, metal parts and coating equipment, which requires not only low-pressure flushing, but also high-pressure cleaning, cooling, and drying nozzles. Selecting the right nozzle becomes a top priority. Plastic clip nozzle Plastic clip-on nozzles use stainless steel clamps to quickly clamp plastic nozzles. It forms a multi-series by directly connecting the…
Read article
Why does the paper industry use nozzles?
With the popularity of nozzles and the special requirements of the papermaking process, nozzles are more and more widely used in the papermaking industry. From the headbox, wire pressing section, drying section, and coiling section, the existence of nozzles is everywhere. The use effect of the nozzle directly affects the quality of the paper, so…
Read article
CYCO nozzle material introduction
Stainless Steel 254SMO 254SMO is one kind of austenitic stainless steel, which with good corrosion resistense, normally they are used for sea desalination and gas desulfurization and denitrification. 316SS/316L Cold denaturation, welding process performance, and perfect high-temperature strength, while 316L is slightly poor high-temperature performance, but its corrosion resistance is better than 316SS, and low…
Read article
Application of Atomizing Nozzle in Dust Yard
Before understanding the dust removal in the nozzle yard, we should first understand the reasons for the dust in the yard:1. Dust during the transfer of the upper belt of the limestone stacker. There is a drop of about 2m between the discharge port of the belt conveyor and the feed port of the limestone…
Read article
Mine fully mechanized mining spray system introduction
The working principle of automatic spraying in fully mechanized mining a) After the receiver detects the infrared light signal emitted by the transmitter, the connected main control box is responsible for converting the position information of the receiver into the programs and parameters set uniformly by the system, and the information is used to determine…
Read article
What are the differences between 303, 304, and 316 stainless steel nozzles?
What we usually call a stainless steel nozzle is a nozzle made of stainless steel. Because stainless steel material has the characteristics of high strength, not easy to rust, resistant to air, water, acid, alkali and salt corrosion, etc., stainless steel nozzles are widely used in papermaking, machinery, electronics, automobiles, power plants, environmental protection, chemicals,…
Read article
Influence of Air-Atomizing Nozzle Gas-liquid Mass Flow
When using an air atomizing nozzle, controlling the gas-liquid flow rate plays a crucial role in the spray angle, particle uniformity and flow rate of the nozzle. So how to control the gas-liquid flow? Taking the working condition of the gas-liquid mass flow ratio of 23% as an example, it can be seen that the…
Read article
Mine dust removal nozzle recommendation
In the process of coal mine production, a large amount of coal dust will be produced. If the dust suppression treatment is not done in time, it will not only pollute the air, but also easily cause great harm to the health of the workers in the work area. Therefore, in modern production mines and…
Read article