Introduction of blowing nozzles
Type F blowing nozzles deliver high-impact, fan-shaped and circular air streams designed for a variety of blowing applications in process processing. This blower is made of ABS plastic or aluminum alloy, and the nozzle is designed with a plurality of cylindrical jet holes, from which the air is blown out to form a fan-shaped and…
Read article
Introduction of Bubble Atomizing Nozzle Technology
The bubble atomization nozzle technology uses bubbles as the driving force for atomization, and uses the generation, movement, deformation of bubbles until the outlet bursts to produce very fine liquid mist. Different from the atomization principle of the “Y” type oil gun, the purpose of atomization is not achieved by overcoming the surface tension of…
Read article
What are the characteristics of air atomizing nozzles?
1. Scope of application Suitable for humidifying, spraying, cooling, spraying and lubricating applications in the paper, electronics, food and pharmaceutical industries. 2. Features 1) Using the friction between the compressed air and the liquid, a very uniform and very fine atomization effect is produced, and the average atomized particle diameter is below 50 microns2) The…
Read article
Application of spray system technology in metallurgical combustion
The spray system usually has four categories of cooling, cleaning, spraying and special applications, and is widely used in metallurgical gas systems, mainly including gas cooling, dust removal, mixing, pipeline compressor impeller equipment cleaning, equipment anti-corrosion, etc. 1. Gas cooling in the clean gas pipeline in front of the gas tank 1. Gas cooling in…
Read article
Features of Two-Fluid Atomizing Nozzle
Because the development history of nozzles is relatively short, there are no national standard parameters and names for nozzles now. Air atomizing nozzles are also called dual-fluid atomizing nozzles. Usually, two parts of air and liquid work together, and then according to the internal structure design of the nozzle, the liquid is It is evenly…
Read article
Advantages of fire water mist nozzles
In the fire protection system, the water mist nozzle uses high pressure to make nitrogen and water rotate at high speed in the nozzle to form water particles or water mist. Water mist is easy to gasify after encountering fire. Everyone knows that nitrogen does not support combustion, so the water mist containing nitrogen can…
Read article
Features of siphon atomizing nozzles
Siphoning is a hydrodynamic phenomenon that draws liquids without the use of a pump. A siphon atomizing nozzle produces a finer droplet spray by increasing the gas pressure or decreasing the liquid pressure, resulting in a higher gas flow rate to liquid flow rate ratio. The fine droplet spray produced by the siphon atomizing nozzle…
Read article
Analysis of the reasons why the atomizing nozzle does not spray
The reason why the atomizing nozzle does not spray is analyzed. The atomizing nozzle is designed according to its working under a variety of different spraying conditions. Therefore, only by selecting the appropriate atomizing nozzle can good spray performance be obtained during use. The characteristics of an atomizing nozzle are mainly reflected in its spray…
Read article
How to make the nozzle atomized particles finer?
There are many types of nozzles, the core components of the atomization system, and the degree of atomization is different. Generally, the customer requirements are that the smaller the atomized particles, the better, so how to get the desired degree of atomization? Two aspects of the nozzle will talk about how to reduce the particle…
Read article
The working principle of environmental protection dust suppression fog cannon
To put it bluntly, the environmental protection dust-removing and dust-removing fog cannon uses high pressure to break the liquid water into very fine particles, which are as fine as the floating dust particles in the air, so that they are held together into a ball, so as to achieve the effect of dust removal. The…
Read article
Dry fog and dust suppression spray system scheme in coal loading and unloading
Coal loading and unloading dust production points: 1) Dock belt conveyor belt head. The material falls into the downstream chute along the belt. Due to the release of the potential energy of the falling material, the material rebounds after the side wall of the chute, and continuously collides with the material that falls later, generating…
Read article
What is high pressure water mist?
High-pressure water mist, also known as micro-water mist, has a pressure greater than 10MPa. It is based on a positive displacement pump, usually a plunger pump, and the system pressure can reach up to 100-200MPa. The high-pressure water mist system and device are generally safe, economical and efficient, and the pressure is usually 10-20MPa. High-pressure…
Read article