Stainless Steel 254SMO 254SMO is one kind of austenitic stainless steel, which with good corrosion resistense, normally they are used for sea desalination and gas desulfurization and denitrification. 316SS/316L Cold denaturation, welding process performance, and perfect high-temperature strength, while 316L is slightly poor high-temperature performance, but its corrosion resistance is better than 316SS, and low…
Before understanding the dust removal in the nozzle yard, we should first understand the reasons for the dust in the yard:1. Dust during the transfer of the upper belt of the limestone stacker. There is a drop of about 2m between the discharge port of the belt conveyor and the feed port of the limestone…
The working principle of automatic spraying in fully mechanized mining a) After the receiver detects the infrared light signal emitted by the transmitter, the connected main control box is responsible for converting the position information of the receiver into the programs and parameters set uniformly by the system, and the information is used to determine…
What we usually call a stainless steel nozzle is a nozzle made of stainless steel. Because stainless steel material has the characteristics of high strength, not easy to rust, resistant to air, water, acid, alkali and salt corrosion, etc., stainless steel nozzles are widely used in papermaking, machinery, electronics, automobiles, power plants, environmental protection, chemicals,…
When using an air atomizing nozzle, controlling the gas-liquid flow rate plays a crucial role in the spray angle, particle uniformity and flow rate of the nozzle. So how to control the gas-liquid flow? Taking the working condition of the gas-liquid mass flow ratio of 23% as an example, it can be seen that the…
In the process of coal mine production, a large amount of coal dust will be produced. If the dust suppression treatment is not done in time, it will not only pollute the air, but also easily cause great harm to the health of the workers in the work area. Therefore, in modern production mines and…
Type F blowing nozzles deliver high-impact, fan-shaped and circular air streams designed for a variety of blowing applications in process processing. This blower is made of ABS plastic or aluminum alloy, and the nozzle is designed with a plurality of cylindrical jet holes, from which the air is blown out to form a fan-shaped and…
The bubble atomization nozzle technology uses bubbles as the driving force for atomization, and uses the generation, movement, deformation of bubbles until the outlet bursts to produce very fine liquid mist. Different from the atomization principle of the “Y” type oil gun, the purpose of atomization is not achieved by overcoming the surface tension of…
1. Scope of application Suitable for humidifying, spraying, cooling, spraying and lubricating applications in the paper, electronics, food and pharmaceutical industries. 2. Features 1) Using the friction between the compressed air and the liquid, a very uniform and very fine atomization effect is produced, and the average atomized particle diameter is below 50 microns2) The…
The spray system usually has four categories of cooling, cleaning, spraying and special applications, and is widely used in metallurgical gas systems, mainly including gas cooling, dust removal, mixing, pipeline compressor impeller equipment cleaning, equipment anti-corrosion, etc. 1. Gas cooling in the clean gas pipeline in front of the gas tank 1. Gas cooling in…
