Principle of high-pressure atomizing nozzle: Each spray device is composed of two parts, an air cap and a liquid cap, which can provide two spray modes: fan-shaped and circular. The nozzle parts are interchangeable, making it very easy to assemble and disassemble. The air atomizing nozzle is a device in which the air flow and…
1. Air atomizing nozzle: The air atomizing nozzle supplies liquid to the nozzle through pressure, and the liquid and compressed gas or gas are mixed internally to produce fine atomized spray. Air atomizing nozzles require a single air source to provide atomizing air. Some models are fitted with automatic air cylinders or clear cutout needles…
1. The water consumption of the rotating sprinkler is 60% less than that of the traditional scattering sprinkler, so each irrigation area can have more rotating sprinklers, thereby reducing the complexity and cost of the entire system. 2. When the rotating nozzle is maintained in a high-efficiency spraying state, no atomization occurs within the pressure…
The special spraying and disinfection equipment for animal husbandry is mainly composed of four parts: pumping station unit, spraying unit, control unit and high-pressure shunt valve unit. 1. Pumping station unit: The pumping station unit uses a high-pressure ceramic plunger pump to generate high-pressure water of 7Mpa, and the pressure of the pumping station is…
The impact atomizing nozzle is a high-speed spray of liquid from the nozzle, which collides with the solid at the nozzle outlet, or two fluids collide with each other, thereby breaking into fine droplets. Impact atomizing nozzles create extremely fine atomization, and in some applications, impact atomizing nozzles can even replace many expensive two-fluid air…
Air atomizing nozzles mainly send liquid to the nozzle by pressure, air and liquid can be mixed externally or internally to produce a fully atomized spray effect. The spray shapes of air atomizing nozzles include 360-degree annular, fan-shaped and deflection fan-shaped spray shapes. Air atomizing nozzles can provide a specific spray shape, specific flow and…
The drying process of centrifugal spray drying equipment can be divided into three stages:1. Use a fine spray of a spray dryer or drop any liquid feed in the atomization process, the spray contacts and suspends the hot gas through a stream that allows the evaporation of the liquid and the removal of dry solids;2.…
As a connection method of the nozzle, the clip nozzle has its own stainless steel clip, which is the core component of the spray system and one of the most commonly used treatment methods before painting. Therefore, the clip adjustable spherical nozzle is actually a An important part of the pre-installation treatment equipment, so are…
Venturi nozzles have a very wide range of applications, and have high work efficiency and practicability, so their working principle has attracted much attention during use. The following is the principle of Venturi nozzles. Nowadays, mixed-flow nozzles and Venturi nozzles are used at a relatively high rate, and they are quite satisfactory in improving the…
In industrial production, mixed flow nozzles are in the technical field of a new technology. And now the use of this kind of nozzle is also very common in China, which is a new development of the nozzle industry in the future. The structure design of the mixed-flow nozzle is to use one of the…
