How the Spiral Nozzle Works

A spiral nozzle is a solid cone or hollow spray nozzle. The jet angle can range from 60°-170° at 3 bar pressure, and the liquid flow rate can range from 5.5-4140 L/min. This compact design has an unobstructed and unblocked coreless straight-through flow channel design, which enables the liquid to reach the maximum flow rate…

Application of Nozzle in Spraying Pretreatment

Spray pretreatment applications involve cleaning, metal parts and coating equipment, which requires not only low-pressure flushing, but also high-pressure cleaning, cooling, and drying nozzles. Selecting the right nozzle becomes a top priority. Plastic clip nozzle Plastic clip-on nozzles use stainless steel clamps to quickly clamp plastic nozzles. It forms a multi-series by directly connecting the…

Why does the paper industry use nozzles?

With the popularity of nozzles and the special requirements of the papermaking process, nozzles are more and more widely used in the papermaking industry. From the headbox, wire pressing section, drying section, and coiling section, the existence of nozzles is everywhere. The use effect of the nozzle directly affects the quality of the paper, so…

CYCO nozzle material introduction

Stainless Steel 254SMO 254SMO is one kind of austenitic stainless steel, which with good corrosion resistense, normally they are used for sea desalination and gas desulfurization and denitrification. 316SS/316L Cold denaturation, welding process performance, and perfect high-temperature strength, while 316L is slightly poor high-temperature performance, but its corrosion resistance is better than 316SS, and low…

Mine fully mechanized mining spray system introduction

The working principle of automatic spraying in fully mechanized mining a) After the receiver detects the infrared light signal emitted by the transmitter, the connected main control box is responsible for converting the position information of the receiver into the programs and parameters set uniformly by the system, and the information is used to determine…

Mine dust removal nozzle recommendation

In the process of coal mine production, a large amount of coal dust will be produced. If the dust suppression treatment is not done in time, it will not only pollute the air, but also easily cause great harm to the health of the workers in the work area. Therefore, in modern production mines and…

Introduction of blowing nozzles

Type F blowing nozzles deliver high-impact, fan-shaped and circular air streams designed for a variety of blowing applications in process processing. This blower is made of ABS plastic or aluminum alloy, and the nozzle is designed with a plurality of cylindrical jet holes, from which the air is blown out to form a fan-shaped and…

Introduction of Bubble Atomizing Nozzle Technology

The bubble atomization nozzle technology uses bubbles as the driving force for atomization, and uses the generation, movement, deformation of bubbles until the outlet bursts to produce very fine liquid mist. Different from the atomization principle of the “Y” type oil gun, the purpose of atomization is not achieved by overcoming the surface tension of…

What are the characteristics of air atomizing nozzles?

1. Scope of application Suitable for humidifying, spraying, cooling, spraying and lubricating applications in the paper, electronics, food and pharmaceutical industries. 2. Features 1) Using the friction between the compressed air and the liquid, a very uniform and very fine atomization effect is produced, and the average atomized particle diameter is below 50 microns2) The…

Features of Two-Fluid Atomizing Nozzle

Because the development history of nozzles is relatively short, there are no national standard parameters and names for nozzles now. Air atomizing nozzles are also called dual-fluid atomizing nozzles. Usually, two parts of air and liquid work together, and then according to the internal structure design of the nozzle, the liquid is It is evenly…

fire fighting

Advantages of fire water mist nozzles

In the fire protection system, the water mist nozzle uses high pressure to make nitrogen and water rotate at high speed in the nozzle to form water particles or water mist. Water mist is easy to gasify after encountering fire. Everyone knows that nitrogen does not support combustion, so the water mist containing nitrogen can…

Features of siphon atomizing nozzles

Siphoning is a hydrodynamic phenomenon that draws liquids without the use of a pump. A siphon atomizing nozzle produces a finer droplet spray by increasing the gas pressure or decreasing the liquid pressure, resulting in a higher gas flow rate to liquid flow rate ratio. The fine droplet spray produced by the siphon atomizing nozzle…