Cleaning System for Enamel Kettle

Cleaning System for Enamel Kettle

Adapter model reaction kettle high-pressure automatic cleaning system is mainly used for cubic tank cleaning, including medium-sized, large fermentation tank cleaning, chemical resin acrylic reaction kettle cleaning and mixing tank cleaning and other kinds of cubic tanks of intelligent automatic cleaning.

Description:

Adapter model reaction kettle high-pressure automatic cleaning system is mainly used for cubic tank cleaning, including medium-sized, large fermentation tank cleaning, chemical resin acrylic reaction kettle cleaning and mixing tank cleaning and other kinds of cubic tanks of intelligent automatic cleaning.

Overview of Mobile Cleaning System for Enamel Kettle
This system is used to clean the main reaction kettle and stirred tank, the working mode of the system is manual operation, which requires the operator to run the whole cleaning process and assistance;
Water supply capacity – rated flow of 8-10m³/h, rated pressure of 10-20 kg;
High-pressure pump protection – anti-idling, anti-holding pressure overload and anti-overheating;
Automatic start and stop – when starting to clean, the main pump starts automatically; when a pause is needed in the cleaning process, close the water valve and the main pump will stop working and turn into the standby state; the main pump starts working after opening the water valve again;
Manual adapters – swing angle, cocking arm, portable one-piece adapter;
Import type hose – composite hose with high pressure resistance 50 Bar and quick-fit interface design;

Cleaning Instructions for Enamel Kettle Cleaning System
Preparation of cleaning equipment – the equipment needs to be pushed by workers to the side of the tank, connecting water, electricity and gas, and confirm that all parts are ready.
Start cleaning – after the operator starts the system, the cleaning time of each position can be manually controlled and changed, the setting time can be changed on the touch screen.
End of cleaning – after cleaning, disconnect the water and electricity, then move to the next tank to be cleaned.
Estimated cleaning time: about 10-20 minutes / each tank, the specific time is based on customer cleanliness requirements.

Industry Application of Enamel Kettle Cleaning System
Mainly used for cleaning in cubic tanks, including medium-sized or large fermentation tanks, stirred tanks and all kinds of cubic tanks of intelligent automatic cleaning.