With the continuous progress of science and technology, solid cone nozzle, as an important industrial equipment, has been widely used in various fields. Solid cone nozzle has many benefits, such as favorable atomization effect, high flow rate and high pressure. They are widely used in surface treatment, pharmaceutical, environmental protection, metallurgy and other fields.
This article will introduce the models and parameters of solid cone nozzles in detail to help readers better understand and choose the right nozzle.
Mainly determined by the diameter and length of the nozzle. Generally, solid cone nozzles are available in diameters ranging from 1mm to 50mm and lengths ranging from 10mm to 50mm. Different models of solid cone nozzles have different flow rates and spray angles which need to be selected according to the actual application.
1. Diameter of the nozzle
One of the most basic parameters. The larger the diameter of the nozzle, the greater the flow rate and spray angle. On the contrary, the smaller the diameter of the nozzle, the smaller the flow rate and spray angle. Depending on the actual application requirements, solid cone nozzles of different diameters can be selected.
2. Length of the nozzle
One of the important parameters. The greater the length of the nozzle, the better the spray uniformity and coverage area. Instead, the lower the length of the nozzle, the worse the uniformity and coverage area of the spray. When selecting a solid cone nozzle, you need to choose the right length for the actual application.
3. Material of the nozzle
Mainly includes stainless steel, copper and aluminum alloys.
Stainless steel has good corrosion resistance and high temperature resistance and is widely used in diverse applications.
With excellent thermal conductivity, copper is widely used in occasions where heating is required.
Aluminum alloys are widely used in situations where light weight and fast machining are required because of its light weight and ease of machining.
4. Pressure and flow rate of the nozzle
Also one of the important parameters. The higher the pressure, the larger the flow and the better the performance. However, too high a pressure can lead to increased wear of the nozzle, so it is necessary to select the right pressure and flow rate for optimal utilization.
Meanwhile, solid cone nozzles of different materials and machining processes can also be selected according to the actual needs to meet the requirements of different fields and technologies.
During use, it is also necessary to pay attention to maintenance to ensure the service life and effectiveness of the nozzle.
In short, solid cone nozzle, an important industrial equipment, need to be selected and used in a comprehensive consideration in conjunction with the actual situation to achieve the best application and maintenance results.