Automatic Air Atomizing Spray Nozzle For Humidify

Previous slide

Next slide

Automatic Air Atomizing Spray Nozzle For Humidify

DJ automatic air atomizing nozzle has an inner gas driver to control “on-off” runs, and can circulate 180 times per minute. When “on-off” runs, only the liquid of the sprayer will be shut off. The liquid flow can be carried to the nozzle body by siphon, gravity or pressure. All the parts of spray nozzle are made accurately at strict quality control standard, to insure running smoothly and long service lifetime.

Click to send an inquiry

Automatic Atomizing Nozzle Feature

The DJ automatic fine atomizing nozzle is characterized by an internal gas drive chamber to control the "on-off" operation, which can run 180 cycles per minute, and each "on-off" operation only cuts off the liquid part of the sprayer
The liquid flow sent to the nozzle can be delivered by siphon or gravity, or by pressure
All nozzle parts are precisely manufactured according to quality standards to achieve smooth operation and long service life
You can choose nozzles made of nickel-plated brass or stainless steel. All nozzles have a hard-draw stainless steel needle valve, stainless steel fluid cap and stainless steel spring

Standard Type:

1/4 DJ nozzle has air and liquid screw thread with the inlet size of 1/4 inch NPT or BSPT (female), and screw thread gas driver
inlet size of 1/8 inch NPT or BSPT (female). This type of nozzle is used with small-flow liquid cap.

45° Type:

1/8 DJ spray nozzle is a compact, automatic atomizing nozzle, with a single inlet for atomizing gas and driver gas. It keeps 45
degree angle between the inlet line and spray line.

Compact Type:

1/8 DJ spray nozzle is a compact, automatic atomizing nozzle, with a pipeline for single gas, it’s designed to be used in small area. The size of screw thread air and liquid inlet is 1/8-inch NPT or BSPT (inner).

Single Gas Pipeline Type:

With a single gas pipeline, 1/4 DJ nozzle can be sued in atomizing gas and liquid during “on-off” period. This type of nozzle requires 2 bar gas pressure at least, and could circulate 180 times per minute.