CY08 Bottle Cleaning Nozzle
When the cleaner is working, confirm the position of the four nozzles as shown in the drawing first. Axial and radial directions are rotated simultaneously according to the set orbit. The nozzles on both sides work at the same time, with the two nozzles on one side cleaning one round first, and the two nozzles on the other side cleaning again with encryption.
Characteristics of the product:
Manufacturing materials:
316L stainless steel, PPS, Rulon special engineering material
Working pressure:
3-15 bar
Recommended pressure:
4-14 bar
Maximum working temperature:
95℃
Maximum environmental temperature:
140℃
Cleaning angle:
360°
Cleaning diameter:
8m
Tank opening:
≥Φ170mm
Interface specification:
G3/4 internal thread
Cleaning period:
5 to 35 minutes
Weight:
3.8kg
Cleaning fluid medium:
water, weak acid solution, weak alkaline solution
Characteristics of the product:
360° cleaning without dead zone
When the cleaner is working, confirm the position of the four nozzles as shown in the drawing first. Axial and radial directions are rotated simultaneously according to the set orbit. The nozzles on both sides work at the same time, with the two nozzles on one side cleaning one round first, and the two nozzles on the other side cleaning again with encryption.
Tightness
The leakage point is sealed with a dynamic seal, which reduces leakage and saves cleaning fluid while generating a greater water flow impact.
Higher impact force
The nozzle adopts a unique stabilized flow design, which can make the jet stream more concentrated, with greater impact and more complete cleaning.
Curvilinear coordinate of performance:
Daily maintenance:
The product is sealed by the outer shell as a whole, and the internal parts are made of self-lubricating and maintenance-free materials, which do not need to add lubricating oil.
During the use, because the dirt of the cleaning solution will build up on the surface of the internal parts which will cause the internal bonding to each other and cannot be started, so it is necessary to pass the water or the solvent of the cleaning solution to clean it after using it every time.
When it is found that it cannot be turned after not being used for a long time, use water or solvent of cleaning solution to soak it for a period of time before using it again.
Related Products
