CY10 Rotating Cleaning Nozzle

Previous slide
Next slide

CY10 Rotating Cleaning Nozzle

Category:
Cleaning nozzle
Spray Angle:
45°-160°
Working pressure::
3-20bar
Operating temperature:
200℉(93℃)
Working flow:
24-40m³/h
Operating temperature:
200℉(93℃)
Materials:
316L、PTEF

Design Features:

This product adopts external thread connection (standard configuration is G2 thread), which is usually connected to the spray rod with flange.

During installation, connect the external thread of the cleaner to the internal thread on the spray rod, put the cleaner into the best cleaning position, and then install the flange of the spray rod.

Design Features:

Category:
Cleaning nozzle
Spray Angle:
45°-160°
Working pressure::
3-20bar
Operating temperature:
200℉(93℃)
Working flow:
24-40m³/h
Operating temperature:
200℉(93℃)
Materials:
316L、PTEF
Cleaning cycle:
5-35min
Minimum opening size:
Φ280mm
Weight:
3.5KG
Maximum tank diameter:
50 feet (15.3 meters)
Inlet connection:
2 NPT or BSPT (M)
Light cleaning diameter:
12-15.3
Medium cleaning diameter:
6-7.5
Heavy cleaning diameter:
2.8-3.5
Cleaning fluid medium:
water, weak acid solution, weak alkali solution
Working principle:
gear reduction drive

Cleaning Principle:

When the cleaner is working, first confirm the position of the four corner drive nozzles in the direction shown in the figure. The axial and radial directions rotate simultaneously according to the set trajectory. While the nozzle on one side is cleaning for one cycle, the nozzle on the other side is encrypted and cleaned for one cycle, achieving an all-round 360 degree °Cleaning without dead ends.

Performance Data:

Application:

CY10

Need an inquiry? Please contact us.