Rotary Air Nozzle
Rotation speed is faster, more stable, 360° no dead Angle clean.
The rotary cleaning high-pressure nozzle is an innovative pneumatic product, which is specially designed to solve the difficult problems of dust removal and water blowing. Foreign matter removal, dryness and static electricity removal in the suitable for the cleanliness production of enterprises, especially and drying of special-shaped parts.
Product information:
Product Name:
Rotary air nozzle
Injection Angle:
Multi-angle adjustable
Working Pressure:
Select according to the use environment
Operating Temperature:
Different materials correspond to different tempe ratures
Material:
Stainless steel
Features:
The rotary cleaning high-pressure nozzle is an innovative pneumatic product, which is specially designed to solve the difficult problems of dust removal and water blowing. Foreign matter removal, dryness and static electricity removal in the suitable for the cleanliness production of enterprises, especially and drying of special-shaped parts.
Application Scenario:
Hand-Held Electrostatic Removal
Electrostatic Removal Of Special-Shaped Parts
Remove Electrostatic Dust From Rim
Shell Drying
Remove Electrostatic Dust From Bumper
Remove Electrostatic Dust Before Automobile Spraying
Optical Product Pretreatment
The Flat Surface Of The Wood/Plastic Board Is Clean
PCB Industry Cleaning System
Product characteristics:
This product is non-contact equipment, not only suitable for flat surface, but also suitable for forming parts and complex structure of the product surface to remove static electricity and dust.
it drives the nozzle through compressed air inside, rotates and jets the air at ultra-high speed, and combines with the high-efficiency electrostatic elimination rod to form a slight vibration and tornado air flow on the surface of the workpiece to clean and blow the small foreign matter on the surface of the product, and then absorbs the dust through the dust cover, and finally collects the dust in the special dust collection box, so as to achieve the best surface electrostatic elimination and cleaning effect. At the same time will not cause secondary pollution.
Features:
1. A variety of specifications to choose, adapt to different requirements of impact, low air consumption
2. lnstantly reduce the electrostatic charge of the surface to +-30V (high-end options are possible)
3. Closed structure. powerful vacuum suction expansion groove
4. The ultra-clean Nozzle RPM and high-precision fitration system make it possible to collect foreign matter
Structure And Principle:
Starting principle: CDA (compressed air) is used as the power source for high-speed rotation, using Bernoulli’s theorem to generate pulsation and turbut lence, thereby forming a low pressure/updraft to remove surface dust and foreign matter, so that the induced air is pumped into the interior of the channel. and discharged to the external dust collection device (Na-Series) through the direction to collect foreign matter
lt is installed within 10-60MM from the surface of the product, and can be cleaned quickly when the safe and effective speed is above 600MM/SEC
Specification Parameter:
Compressed air requirement
Operating pressure: 4–8 Bar(Max.10 Bar):
Dust: particle diameter 5um; Concentration 5mg/m3, Water: Pressure dew point -20°C: Oil content 0.01ma/m³
Product Shooting:
Strength Factory:
Imported proccessing equipment
Testing Equipment
Professional team
