Venturi Nozzle Eductor Mixing Spray Nozzle
Venturi nozzle designed on the basis of the berboulli theory, fluid under pressure is pumped into the nozzles through its large flow opening, as the liquid exits the nozzle at high velocity.
Venturi nozzle material Characteristic:
Constructed of carbon fiber glass reinforced PP/316SS.
Max operation temperature of PP: 80°C， 316SS: 300°C.
Corrosion resistance and aging resistance.
Venturi nozzle provides a homogeneous fluid mix without the use if air agitation precluding oxidative decomposition of air agitation of the solutions.
Improves circulation of the turbulent flow and optimized mixture of the solutions.
Assures uniform mixture of solutions and improve product quality.
Venturi nozzle designed on the basis of the berboulli theory, fluid under pressure is pumped into the nozzles through its large flow opening, as the liquid exits the nozzle at high velocity. It draws surrounding solution through the nozzle’s “flow-through” chamber that’s designed to eliminate internal material build-up. The additional liquid flow mixes with the pumped solution. That is the nozzle can pull in 4 gallons of surrounding solution for every 1 gallon pumped through the nozzle.
1/4'', 3/8'', 1/2'', 3/4''
Max Temperature of PP
Max Temperature of 316SS
In large solution tank, annular distribution of the mix fluid nozzle is more effective than mono-distribution, and horizontal arrangement is the lowest efficiency. The mixing fluid nozzle should be intalled at the bottom of the tank in order to get to a maximum circulation rate. Below are some of the typical distribution of the mixing fluid nozzle.