The spray type coverage area formed by the Full cone nozzle is circular, square or oval, and the area is completely filled with spray droplets. This type of spray is usually created with internal vanes. The vanes allow controlled turbulence of the liquid before the nozzle orifice. Full cone coverage can also be obtained using header arrangement of atomizing or fine spray nozzles; Full cone nozzles are mainly used in cleaning and rinsing, spray coating, spray cooling, defoaming, chemical spraying, dusting and dust removal.

The main product categories are as follows:
Full cone combination wide angle series
This is a Full cone-shaped nozzle that can produce a large angle spray shape, the spray angle is between 102 degrees and 120 degrees, the spray shape is full circle or square, the working pressure is 0.4-6Mpa, and the flow rate is 0.83-14.3L/Min. The unit is assembled and assembled, which is convenient for installation and disassembly, and can be matched with a filter. Standard inch thread connection, can be customized for other connection methods
Full cone combination standard angle series
This is a Full cone-shaped nozzle with a small spray angle, which can produce a spray with an angle of 45-67 degrees. The spray shape is round and square, the working pressure is 0.4-10Mpa, and the flow rate is 0.16-13.0L/Min. The unit is assembled and assembled, which is convenient for installation and disassembly, and can be matched with a filter. Standard inch thread connection, can be customized for other connection methods
Full cone combination square series
It can produce a Full cone spray of 60-75 degree spray, the spray shape is round and square, the working pressure is 0.4-10Mpa, and the flow rate is 0.4-23L/Min. The unit is assembled and assembled, which is convenient for installation and disassembly, and can be matched with a filter. Standard inch thread connection, can be customized for other connection methods
Full cone square wide angle series
There are intersecting blades inside the nozzle, and the nozzle is a cross groove. The shape of the generated spray is square, the spray coverage is large, the spray angle is 93-110 degrees, and the spray droplets are small and uniform. The nozzle is especially suitable for the workplace where overlapping spray ranges are required.
Full cone square standard angle series
There are intersecting blades inside the nozzle, and the nozzle is a cross groove. The shape of the generated spray is square, the spray angle is 47-102 degrees, and the spray droplets are small and uniform. This nozzle is especially suitable for the workplace where overlapping spray ranges are required.
Full cone porous series
Porous structure, no internal blade design, the possibility of blockage is reduced, the shape of the spray is a dense large flow Full cone, the spray distance is long, the spray range is large, and it is suitable for occasions requiring a long working distance
Full cone corner series
It has the same spray characteristics as the general Full cone nozzle, the spray shape is Full cone, and the spray angle has two types: standard angle and wide angle. This nozzle is suitable for spray pipes with side openings.
Full cone wall mount series
It has the same spray characteristics as general Full cone nozzles, the spray shape is Full cone, the nozzle head has external threads, the specifications are the same as the threads at the nozzle inlet, and it is suitable for installation on the outer wall of containers and pipes.
Full cone Spiral Series
Spiral nozzle with standard structure design, widely used. There are a variety of angles and flow parameters to choose from, and can provide special needs service nozzle design, internal non-clogging structure design, can be used in dust control, desulfurization and denitrification, and various synthesis towers.
Full cone Spiral Series
The standard structure design of the spiral nozzle is different from the A series in that the optional angle range of its spray shape is larger.
Full cone anti-blocking series
Integral design, the internal double vanes form the passage diameter, which is integrally cast with the nozzle. The diameter of the particles allowed to pass through the nozzle is three times larger than that of the ordinary Full cone, which avoids the problem of nozzle clogging under harsh working conditions.
Full cone super flow series
The spray shape is a Full cone, the spray angle is 50°~95°, and the spray particles are very large, and a Full cone spray can be formed at ultra-low pressure (0.7Mpa). Features oversized flow channels and outlets for clog-free operation
Full cone high flow series
The Full cone nozzle has a unique vane design inside, which ensures a uniform atomization effect even in the case of a large flow.
Full cone narrow angle series
The spray angle of the nozzle is a Full cone with a spray angle of 15 degrees. The spray particles are small and uniform, and the impact force within the spray range is very strong. It is suitable for use in cleaning and other workplaces.
Full cone wide angle series
The blade structure inside the nozzle enables it to produce uniform and fine spray droplets, with a wide range of spray angles.
Full cone Universal Series
The vane structure inside the nozzle enables it to produce uniform and fine spray droplets, spray angles and general Full cones